PART A - NOTIFICATION

Section 2. Czech technical standards

NOTICE No 71/19

Office for Technical Standardization, Metrology and State Testing

on the issue of CSNs, their amendments, corrections and cancellations

The Office for Technical Standardization, Metrology and State Testing, pursuant to Section 4 of Act No. 22/1997 Coll., announces that the following CSNs have been issued, amended, corrected or cancelled.

The validity of CSNs, their amendments and corrections generally begins on the first day of the month following the month of issue, unless otherwise specified.

Standards marked
*) adopt international or European standards by adopting the original.

For amendments and corrections that change the title of the standard and are issued under a changed title, the new title is given first. In such cases, the original title of the standard is given in brackets for information.


ISSUED CSN

1. ČSN ISO 14827-3 (01 8270) cat.no. 508146	Traffic Information and control systems - Data interfaces between traffic information centres and control systems - Part 3: XML data interfaces (Profile A) between Intelligent Transport Systems (ITS) centres *); Release date: August 2019

2. ČSN ISO 29281-2 (01 8405) cat.no. 508049	Smart Transport systems - Local roads - Part 2: Support for existing systems*); Release date: August 2019 Its issuance cancels
CHSN ISO 29281-2 (01 8405)	Intelligent Transport Systems - Communication Infrastructure for Land Mobile Equipment (CALM) - Connecting CALM to a non-IP network - Part 2: Support for existing communication interfaces in use; Release: November 2013

3. HCN EN ISO 2085 (03 8650) cat.no. 508174	Anodic oxidation Aluminium and its alloys - Continuity control of thin anodic oxide Coatings - Copper sulphate test; (idt ISO 2085:2018); Issue: August 2019 Its issuance cancels
EN ISO 2085 (03 8650)	Anodic oxidation of aluminium and its alloys - Control context of thin anodic oxide coatings - Copper sulphate test; Announced: April 2019

4. HCN EN ISO 3211 (03 8650) cat.no. 508175	Anodic oxidation Aluminium and its alloys - Assessment of the resistance of anodic oxide coatings against cracking during deformation; (idt ISO 3211:2018); Issue: August 2019 Its issuance cancels
EN ISO 3211 (03 8650)	Anodic oxidation of aluminium and its alloys - Determination Resistance of anodic oxide coatings to deformation cracking; Issue: February 2011

5. HCN EN ISO 8994 (03 8650) cat.no. 508209	Anodic oxidation Aluminium and its alloys - Corrosion point evaluation system - Grid method; (idt ISO 8994:2018); Issue: August 2019 Its issuance cancels
EN ISO 8994 (03 8650)	Anodic oxidation of aluminium and its alloys - Evaluation system Point corrosion - Grid method; Issue: August 2011

6. HCN EN ISO 14114 (05 2122) cat.no. 507781	Equipment for flame welding - Acetylene distribution systems for welding, cutting and Related processes - General requirements; (idt ISO 14114:2017); Issue: August 2019 Its issuance cancels
EN ISO 14114 (05 2122)	Flame welding equipment - Acetylene distributors Systems for welding, cutting and related processes - General requirements; Announced: August 2018

7. ČSN EN IEC 60974-14 (05 2205) cat.no. 508034	Equipment for Arc welding - Part 14: Calibration, validation and consistency testing; Release date: August 2019 With effect from 2021-11-23 is repealed
EN 50504 (05 2203)	Arc welding equipment validation; Announced: January 2009

8. ČSN EN 12645 (25 7013) cat.no. 505657	Pressure gauges in Tyres - Instruments for checking pressure and/or inflation/deflation Motor vehicle tyres - Metrology, requirements and testing; Issue: August 2019 Its issuance cancels
EN 12645 (25 7013)	Tyre Pressure Gauges - Instruments for checking Pressure and/or inflation of motor vehicle tyres - Metrology, requirements and Testing; Announced: July 2015

9. ČSN ISO 1070 (25 9315) cat.no. 508057	Hydrometry - Slope and area method; Release date: August 2019 Its issuance cancels
CSN ISO 1070 (25 9315)	Measurement of fluid flow in open channels. Method slope and area; Issue: June 1994

10. ČSN EN 81-28+AC (27 4003) cat.no. 507132	Security regulations for the design and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote emergency signalling for lifts intended for the transport of persons and people and costs; Release date: August 2019 Its issuance cancels
EN 81-28 (27 4003)	Safety regulations for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote emergency signalling for lifts intended for the transport of persons and goods; Issue: February 2019

11. ČSN EN 81-71+AC (27 4003) cat.no. 507133	Security Regulations for the construction and installation of lifts - Special modifications of lifts intended for transport of persons and goods - Part 71: Vandal-resistant lifts; Issue: August 2019 Its issuance cancels
EN 81-71 (27 4003)	Safety regulations for the construction and installation of lifts - Special arrangements for lifts intended for the transport of persons and goods - Part 71: Vandal-resistant lifts; Issue: March 2019
	With effect from 2020-05-31 is repealed
EN 81-71+A1 (27 4003)	Safety regulations for the construction and installation of lifts - Special arrangements for lifts for the transport of persons and goods - Part 71: Vandal resistant lifts; Issue: July 2007

12. ČSN ISO 20035 (30 0650) cat.no. 508024	Smart Transport Systems - Cooperative Adaptive Cruise Control (CACC) Systems - Functional requirements and test procedures*); Release date: August 2019

13. ČSN ISO 22241-1 (30 2460) cat.no. 507989	Diesel engines - NOx reducing agent, aqueous urea solution (AUS 32) - Part 1: Requirements on quality; Release date: August 2019 Its issuance cancels
HSN ISO 22241-1 (30 2460)	Diesel engines - NOx reduction reagent, aqueous solution Urea (AUS 32) - Part 1: Quality requirements; Issue: February 2016

14. HCN EN ISO 10087 (32 1020) cat.no. 508204	Small vessels - Vessel identification - Coding system; (idt ISO 10087:2019); Issue: August 2019 Its issuance cancels
EN ISO 10087 (32 1020)	Small craft - Hull identification - Code System; Release: November 2006

15. CHSN IEC 60050-821 (33 0050) cat.no. 505799	International electrical engineering dictionary - Chapter 821: Railway signalling and signalling equipment facilities; Release date: August 2019 Its issuance cancels
CCN IEC 60050-821 (33 0050)	International Electrotechnical Dictionary - Chapter 821: Railway signalling and signalling equipment; Issue: December 2002

16. CSN 33 2000-5-56 ed. 3 cat.no. 508172	Electric Low-voltage installations - Part 5-56: Selection and construction of electrical installations - Equipment for security purposes; (idt HD 60364-5-56:2018); (idt IEC 60364-5-5-56:2018); Release date: August 2019 With effect from 2021-12-07 is repealed
CSN 33 2000-5-56 ed. 2	Low-voltage electrical installations - Part 5-56: Selection and Construction of electrical installations - Equipment for safety purposes; Issue: October 2010

17. EN IEC 60079-15 ed. 4 (33 2320) cat.no. 508137	Explosive atmospheres - Part 15: Equipment protected by protection type 'n'; (idt IEC 60079-15:2017); Issue: August 2019 With effect from 2022-04-19 is repealed
EN 60079-15 ed. 3 (33 2320)	Explosive atmospheres - Part 15: Type-protected equipment Protection "n"; Release: December 2010

18. EN IEC 61000-3-2 ed. 5 (33 3432) cat.no. 508010	Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (devices with input phase current ≤ 16 A); (idt IEC 61000-3-2:2018); Issue: August 2019 With effect from 2022-03-01 is repealed
CSN EN 61000-3-2 ed. 4 (33 3432)	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emission (devices with input phase current ≤ 16 A); Issue: March 2015

19. EN IEC 60674-3-2 ed. 2 (34 6573) cat.no. 508163	Specifications Plastic films for electrical purposes - Part 3: Specifications individual materials - Sheet 2: Requirements for biaxially balanced oriented polyethylene terephthalate (PET) film used for for electrical insulation purposes*); (idt IEC 60674-3-2:2019); Issue: August 2019 With effect from 2022-06-14 is repealed
EN 60674-3-2 (34 6573)	Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxial oriented polyethylene terephthalate (PET) film used for for electrical insulation purposes; Issue: January 1999

20. EN IEC 61051-1 ed. 2 (35 8080) cat.no. 508135	Varistors for use in electronic devices - Part 1: Generic specification*); (idt IEC 61051-1:2018); Issue: August 2019 With effect from 2021-12-03 is repealed
EN 61051-1 (35 8080)	Varistors for use in electronic equipment - Part 1: Tribal specification; Announced: July 2009

21. EN IEC 60793-2-50 ed. 6 (35 9213) cat.no. 508050	Optical fibres - Part 2-50: Product specification - Sub-specification for monofilaments Class B*); (idt IEC 60793-2-50:2018); Issue: August 2019 With effect from 2022-01-18 is repealed
EN 60793-2-50 edition 5 (35 9213)	Optical fibres - Part 2-50: Product specification - Subparts Specification for single-mode Class B fibres; Issue: July 2016

22. ČSN EN IEC 62149-10 (35 9276) cat.no. 508058	Fibre optic Active components and devices - Performance standards - Part 10: Transceivers RoF (radio on optical fibre) for mobile fronthaul*); (idt IEC 62149-10:2018); Issue: August 2019

23. EN IEC 60601-2-16 ed. 3 (36 4801) cat.no. 508029	Medical Electrical apparatus - Part 2-16: Particular requirements for basic safety and the necessary functionality of haemodialysis, haemodiafiltration and haemofiltration instruments; (idt IEC 60601-2-16:2018); Issue: August 2019 With effect from 2022-05-24 is repealed
EN 60601-2-16 ed. 2 (36 4801)	Medical electrical apparatus - Part 2-16: Particular requirements for basic safety and essential functionality of hemodialysis, hemodiafiltration and hemofiltration devices; Issue: January 2016

24. EN IEC 80601-2-30 ed. 2 (36 4801) cat.no. 508027	Medical Electrical apparatus - Part 2-30: Particular requirements for basic safety and the necessary functionality of automated non-invasive tonometers; (idt IEC 80601-2-30:2018); Issue: August 2019 With effect from 2022-05-24 is repealed
EN 80601-2-30 (36 4801)	Medical electrical apparatus - Part 2-30: Particular requirements for basic safety and essential functionality of automated non-invasive sphygmomanometers; Issue: May 2011

25. EN IEC 60601-2-39 ed. 3 (36 4801) cat.no. 508025	Medical Electrical apparatus - Part 2-39: Particular requirements for basic safety and the necessary functionality of peritoneal dialysis machines; (idt IEC 60601-2-39:2018); Release date: August 2019 With effect from 2022-05-24 is repealed
EN 60601-2-39 ed. 2 (36 4801)	Medical electrical equipment - Part 2-39: Particular the requirements for basic safety and the necessary functionality of apparatus for peritoneal dialysis; Issue: December 2008

26. CHSN ISO/IEC 20924 (36 9020) cat.no. 508014	Internet of Things (IoT) - Dictionary; Release date: August 2019

27. ČSN ISO 7112 (47 6010) cat.no. 508153	Forestry machinery - Portable brushcutters and grass trimmers - Glossary; Release date: August 2019 Its issuance cancels
CSN ISO 7112 (47 6010)	Forestry Machinery - Portable brush cutters and grass trimmers Glossary; Issue: December 2017

28. EN ISO 6887-4 (56 0102) cat.no. 508133	Microbiology Food chain - Preparation of analytical samples, initial suspension and 10-fold dilutions for microbiological testing - Part 4: Specific instructions for different products; (idt ISO 6887-4:2017); Issue: August 2019 Its issuance cancels
EN ISO 6887-4 (56 0102)	Microbiology of the food chain - Modification of analytical samples, preparation of initial suspension and tenfold dilutions for Microbiological testing - Part 4: Specific rules for different products; Announced: October 2017

29TH CSN ISO 48-2 (62 1433) cat.no. 508043	Rubber, vulcanised or thermoplastic elastomer - Determination of hardness - Part 2: Hardness between 10 IRHD and 100 IRHD; Release date: August 2019 Its issuance cancels
CSN ISO 48 (62 1433)	Rubber, vulcanised or thermoplastic elastomer - Hardness determination (hardness between 10 IRHD and 100 IRHD); Issue: November 2011

30. ART. EN 1762 (63 5440) cat.no. 508045	Rubber hoses and hoses with end caps for liquefied petroleum gases, LPG (liquid or gaseous phase) and natural gas up to 25 bar (2,5 MPa) - Specifications; Release date: August 2019 Its issuance cancels
EN 1762 (63 5440)	Rubber hoses and hoses with end caps for liquefied petroleum LPG (liquid or gas phase) and natural gas up to 25 bar (2.5 MPa) - Specifications; Release: August 2017

31. ČSN EN 438-2+A1 (64 7501) cat.no. 508044	High Pressure decorative laminates (HPL) - Boards based on reactive plastics (usually called Laminates) - Part 2: Determination of properties; Release date: August 2019 Its issuance cancels
EN 438-2 (64 7501)	High Pressure Decorative Laminates (HPL) - Baseboards reactoplasts (commonly called laminates) - Part 2: Determination of properties; Release date: September 2016

32. EN 589 (65 6503) cat.no. 508150	Motor fuels - Liquefied petroleum gases (LPG) - Technical requirements and test methods; Release date: August 2019 Its issuance cancels
EN 589+A1 (65 6503)	Motor Fuels - Liquefied Petroleum Gases (LPG) - Technical Requirements and test methods; Issue: October 2012

33. ČSN EN 16140 (72 1190) cat.no. 508134	Test methods Natural stone - Determination of sensitivity to changes in appearance caused by thermal cycles; Release date: August 2019 Its issuance cancels
EN 16140 (72 1190)	Test methods for natural stone - Determination of sensitivity for changes in appearance caused by thermal cycles; Announced: July 2019

34. CSN EN 13369 ed. 2 (72 3001) cat.no. 508040	Common provisions for precast concrete; Release date: August 2019 With effect from 2021-04-30 is repealed
EN 13369 (72 3001)	Common provisions for precast concrete products; Edition: November 2013
	Its issuance cancels
CSN EN 13369 ed. 2 (72 3001)	Common provisions for precast concrete; Promulgated: October 2018

35. HSN EN ISO 12631 (73 0321) cat.no. 507788	Thermal behaviour lightweight envelopes - Calculation of the heat transfer coefficient; (idt ISO 12631:2017); Release date: August 2019 Its issuance cancels
EN ISO 12631 (73 0321)	Thermal behaviour of lightweight envelopes - Calculation heat transfer coefficient; Announced: March 2018

36. HSN EN ISO 7345 (73 0553) cat.no. 507789	Thermal behaviour Buildings and Building Components - Physical quantities and definitions; (idt ISO 7345:2018); Release date: August 2019 Its issuance cancels
EN ISO 7345 (73 0553)	Thermal behaviour of buildings and building components - Physical quantities and definitions; Announced: October 2018

37. EN 17037 (73 0582) cat.no. 508154	Day lighting buildings; Release date: August 2019 Its issuance cancels
CSN 73 0581	Illumination of buildings and outdoor spaces - Method of determination values; Release date: September 2009
EN 17037 (73 0582)	Daylighting in buildings; Announced: May 2019

38. EN 1364-5 (73 0853) cat.no. 508143	Fire testing Resistance of non-load bearing elements - Part 5: Ventilation grilles; Release date: August 2019 Its issuance cancels
EN 1364-5 (73 0853)	Fire resistance testing of non-load bearing members - Part 5: Ventilation grilles; Announced: October 2017

39. ČSN EN 15882-1+A1 (73 0856) cat.no. 508144	Extended application Results of tests on the fire resistance of service installations - Part 1: Fire performance durable air ducts; Release date: August 2019 Its issuance cancels
EN 15882-1+A1 (73 0856)	Extended application of fire resistance test results service installations - Part 1: Fire-resistant air ducts; Announced: February 2018

40. EN 1090-4 (73 2601) cat.no. 508064	Implementation of steel and aluminium structures - Part 4: Technical requirements for cold-rolled steel shaped elements and structures for use in roofs, ceilings, floors and Walls; Release date: August 2019 Its issuance cancels
EN 1090-4 (73 2601)	Execution of steel and aluminium structures - Part 4: Technical requirements for cold-formed steel members and structures for use in roofs, ceilings, floors and walls; Announced: December 2018

41. EN 14702-3 (75 8060) cat.no. 508168	Characterisation of sludge - Settling properties - Part 3: Determination of zonal settling velocity (ZSV); Release date: August 2019

42. EN ISO 11393-1 (83 2770) cat.no. 508165	Protective clothing for users of hand-held chainsaws - Part 1: Test equipment for testing resistance to chainsaw cuts; (idt ISO 11393-1:2018); Issue: August 2019 Its issuance cancels
EN ISO 11393-1 (83 2770)	Protective clothing for users of hand-held chainsaws - Part 1: Chainsaw cut resistance test equipment; Announced: April 2019

43. EN ISO 11393-3 (83 2770) cat.no. 508166	Protective clothing for users of hand-held chainsaws - Part 3: Test methods for footwear; (idt ISO 11393-3:2018); Issue: August 2019 Its issuance cancels
EN ISO 11393-3 (83 2770)	Protective clothing for users of hand-held chainsaws - Part 3: Test methods for footwear; Announced: April 2019

44. ČSN EN 16121+A1 (91 0414) cat.no. 507994	Non-residential storage Furniture - Requirements for safety, strength, durability and stability; Release date: August 2019 Its issuance cancels
ČSN EN 16121+A1 (91 0414)	Non-domestic storage furniture - Safety requirements, strength, durability and stability; Announced: March 2018

CHANGES TO CSN

45. HSN ISO 24534-5 (01 8350) cat.no. 508053	Automatic Identification of vehicles, equipment and cargo - Electronic identification Vehicle registration (ERI) - Part 5: Application layer security using symmetric encryption; Release date: June 2012 Change Amd. 1*); Release date: August 2019

46. EN 81-71+A1 (27 4003) cat.no. 508019	Security Regulations for the construction and installation of lifts - Special regulations for lifts for transport of persons and goods - Part 71: Vandal-resistant lifts; Issue: July 2007 Change Z2; Release date: August 2019 Its issuance cancels
	Amendment Z1; Issue: March 2019

47. CCN IEC 60050-617 (33 0050) cat.no. 508170	International electrical dictionary - Part 617: Electricity market; Release date: May 2011 Change A3; Release date: August 2019

48. CCN IEC 50(691) (33 0050) cat.no. 508052	International electrical dictionary - Chapter 691: Electricity tariffs; Issue: February 1997 Change A1; Release date: August 2019

49. CSN EN 50438 ed. 2 (33 0127) cat.no. 508008	Requirements for parallel connection of microgenerators with public low-voltage distribution networks Voltage; Release date: September 2014 Change Z2; Release date: August 2019

50. CSN 33 2000-5-56 ed. 2 cat.no. 508173	Electric Low-voltage installations - Part 5-56: Selection and construction of electrical installations - Equipment for security purposes; Release date: October 2010 Change Z4; Release date: August 2019

51. EN 60079-15 ed. 3 (33 2320) cat.no. 508138	Explosive atmospheres - Part 15: Equipment protected by protection type 'n'; Issue: December 2010 Change Z1; Release date: August 2019

52. CSN EN 61000-3-2 ed. 4 (33 3432) cat.no. 508011	Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (devices with input phase current ≤ 16 A); Release date: March 2015 Change Z1; Release date: August 2019

53. CCN IEC 50(161) (33 4201) cat.no. 508009	International electrotechnical dictionary - Chapter 161: Electromagnetic compatibility; Issue: December 1993 Change A8; Release date: August 2019

54. EN 60674-3-2 (34 6573) cat.no. 508164	Plastic films for Electrotechnical applications - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) foil used for electrical insulation purposes; Issue: January 1999 Change Z1; Release date: August 2019

55. EN 60947-4-1 ed. 3 (35 4101) cat.no. 508188	Switching and control Low-voltage apparatus - Part 4-1: Contactors and motor starters - Part 4-1: Motor starters Electromechanical contactors and motor starters; Issue: December 2010 Change Z1; Release date: August 2019

56. CSN EN 60793-2-50 ed. 5 (35 9213) cat.no. 508051	Optical fibres - Part 2-50: Product specification - Sub-specification for monofilaments Class B; Release date: July 2016 Change Z1; Release date: August 2019

57. CSN 36 0011-1 cat.no. 508155	Lighting measurement Premises - Part 1: Basic provisions; Release date: February 2014 Change Z1; Release date: August 2019

58. CSN 36 0011-2 cat.no. 508156	Lighting measurement Premises - Part 2: Daylighting measurements; Release date: February 2014 Change Z1; Release date: August 2019

59. CSN 36 0020 cat.no. 508157	Associated lighting; Release date: January 2015 Change Z1; Release date: August 2019

60. CSN EN 60188 ed. 2 (36 0230) cat.no. 508047	High pressure mercury Discharge lamps - Performance requirements; Issue: March 2002 Amendment A11*); Release date: August 2019

61. EN 60601-2-16 ed. 2 (36 4801) cat.no. 508030	Medical Electrical apparatus - Part 2-16: Particular requirements for basic safety and the necessary functionality of haemodialysis, haemodiafiltration and haemofiltration instruments; Release date: January 2016 Change Z1; Release date: August 2019

62. EN 80601-2-30 (36 4801) cat.no. 508028	Medical Electrical apparatus - Part 2-30: Particular requirements for basic safety and the necessary functionality of automated non-invasive sphygmomanometers; Release date: May 2011 Change Z1; Release date: August 2019

63. EN 60601-2-39 ed. 2 (36 4801) cat.no. 508026	Medical Electrical apparatus - Part 2-39: Particular requirements for basic safety and the necessary functionality of peritoneal dialysis machines; Issue: December 2008 Change Z1; Release date: August 2019

64. EN ISO 472 (64 0001) cat.no. 508042	Plastics - Glossary; Release date: October 2015 Change A1; (idt ISO 472:2013/Amd.1:2018); Issue: August 2019

65. EN 13369 (72 3001) cat.no. 508152	Common provisions for precast concrete; Release date: November 2013 Change Z2; Release date: August 2019 Its issuance cancels
	Amendment Z1; Issue: October 2018

66. CSN 73 0580-1 cat.no. 508159	Day lighting buildings - Part 1: Basic requirements; Release date: June 2007 Change Z3; Release date: August 2019

67. CSN 73 0580-2 cat.no. 508160	Day lighting Buildings - Part 2: Daylighting in residential buildings; Release date: June 2007 Change Z1; Release date: August 2019

68. CSN 73 0580-3 cat.no. 508161	Day lighting Buildings - Part 3: Daylighting in schools; Issue: September 1994 Change Z3; Release date: August 2019

69. CSN 73 0580-4 cat.no. 508162	Day lighting Buildings - Part 4: Daylighting in industrial buildings; Issue: September 1994 Change Z3; Release date: August 2019

70. ČSN 73 4301 cat.no. 508158	Residential buildings; Release date: June 2004 Change Z4; Release date: August 2019

71. EN ISO 10079-1 ed. 2 (85 2703) cat.no. 508048	Medical Extraction equipment - Part 1: Electric extraction equipment; Release date: June 2016 Change A1; (idt ISO 10079-1:2015/Amd.1:2018); Issue: August 2019

REPAIRS CSN

72. EN 50463-2 ed. 2 (34 1566) cat.no. 508169	Railway equipment - Energy measurement on board a train - Part 2: Energy measurement; Issue: April 2018 Correction 1; Issue: August 2019 (Correction is in print)

CANCELLED CSN

73. EN IEC 60335-2-76 ed. 3 (36 1050)	Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for power sources for electrical Fencing; Issue: May 2019; Cancelled as of 2019-09-01 Its abolition shall abolish EN 60335-2-76 ed. 2 Amendment Z1; Issue May 2019; Revoked k 2019-09-01

74. CHSN ISO 22004 (56 9610)	Food safety management systems - Instructions for use ISO 22000; Issue: October 2015; Revoked as of 2019-09-01

Czech Agency for
standardization

Director of the Department
Standardization

Zdeňka Slaná v. r.

NOTICE No 72/19

Office for Technical Standardization, Metrology and State Testing

information on
approval of European standards for direct use as CSN

Office for
technical standardisation, metrology and state testing pursuant to Section 4 of Act No.
22/1997 Coll. announces that the English versions of the following European standards have been
approved for direct use as CSN.

Note:

If the
the term "harmonized standard" is given in the name of the CSN, it is the Czech
the translation of this term in the title of the European standard being transposed
(telecommunications line). In the Czech Republic, this CSN will become harmonized in
within the meaning of § 4a of Act No. 22/1997/Sb., on technical requirements for products and on
amendment and supplementation of certain acts, as amended by Act No. 71/2000 Coll., on the basis of
publication of the relevant European standard as harmonised in the Official Journal
European Communities.

This fact
The Office for Technical Standardization, Metrology and State Testing shall announce in
Bulletin of the Office for Technical Standardization, Metrology and State Testing with
indicating the technical regulation of the Czech Republic to which this standard refers
Covered.

For standards and amendments marked ⁺⁾ is being prepared
taking over by translation.

For amendments and corrections that change the title of the standard and are issued
already under a changed name, the new name is given in the first place. The original name
of the standard is given in brackets in these cases for information.


EVROPSKÉ NORMS APPROVED K DIRECT USING AS CSN

1. ČSN EN 17161 (01 0393) cat.no. 507369	Design for all - Availability of products, goods and services under the Design for All approach - Extending the range of users; EN 17161:2019; Valid from 2019-09-01

2. EN ISO 4869-1 (01 1640) cat.no. 507375	Acoustics - Protectors Hearing aids - Part 1: Subjective method for measuring insertion loss; EN ISO 4869-1:2018; ISO 4869-1:2018; Valid from 2019-09-01 Its promulgation repeals
CSN ISO 4869-1 (01 1640)	Acoustics. Hearing protectors. Part 1: Subjective method measurement of insertion loss; Issue: January 1993

3. EN ISO 4869-2 (01 1640) cat.no. 507376	Acoustics - Protectors Hearing aids - Part 2: Estimation of sound pressure levels A behind the fitted ear defender Hearing Aid; EN ISO 4869-2:2018; ISO 4869-2:2018; Valid from 2019-09-01 Its promulgation repeals
CSN ISO 4869-2 (01 1640)	Acoustics. Hearing protectors - Part 2: Estimation of sound pressure levels A for hearing protector in place; Issue: February 1996

4. HCN EN ISO 7779 (01 1652) cat.no. 507372	Acoustics - Measurements airborne noise emitted by information technology equipment and Telecommunications; EN ISO 7779:2018; ISO 7779:2018; Valid from 2019-09-01 Its promulgation repeals
EN ISO 7779 (01 1652)	Acoustics - Measurement of airborne, radiated noise information technology and telecommunications equipment; Issue: December 2010

5. EN ISO 17201-1 (01 1690) cat.no. 507373	Acoustics - Noise Rifle ranges - Part 1: Determination of muzzle blast noise by measurement; EN ISO 17201-1:2018; ISO 17201-1:2018; Valid from 2019-09-01 Its promulgation repeals
EN ISO 17201-1 (01 1690)	Acoustics - Rifle range noise - Part 1: Determination of shot noise at Mouth of the barrel by measurement; Issue: February 2006

6. ČSN EN 17120 (01 2074) cat.no. 507371	Photocatalysis - Water purification - Performance measurement of photocatalytic materials using phenol degradation; EN 17120:2019; Valid from 2019-09-01

7. CCN EN ISO 11148-13 (23 9060) cat.no. 507382	Non-electric handheld Tools - Safety requirements - Part 13: Striking tools⁺⁾; EN ISO 11148-13:2018; ISO 11148-13:2017; Valid from 2019-09-01

8. ČSN EN 1434-5+A1 (25 8511) cat.no. 507383	Heat Meters - Part 5: Tests for initial verification⁺⁾; EN 1434-5:2015+A1:2019; Valid from 2019-09-01 Its promulgation repeals
EN 1434-5 (25 8511)	Heat meters - Part 5: Tests for initial verification; Announced: May 2016

9. ČSN EN 1434-6+A1 (25 8511) cat.no. 507384	Heat Meters - Part 6: Installation, commissioning, monitoring and maintenance⁺⁾; EN 1434-6:2015+A1:2019; Valid from 2019-09-01 Its promulgation repeals
EN 1434-6 (25 8511)	Heat meters - Part 6: Installation, commissioning, activity monitoring and maintenance; Announced: May 2016

10. ČSN EN 16842-9 (26 8818) cat.no. 507385	Motorised trolleys - Visibility - Test methods and verification - Part 9: Loading trailers, side and front stacking trolleys with raised operator position; EN 16842-9:2019; Valid from 2019-09-01

11. ČSN EN 14033-4 (28 1005) cat.no. 507386	Railway applications - Railway applications - Railway construction and maintenance machines - Part 4: Technical requirements for driving, moving and working on urban rail systems; EN 14033-4:2019; Valid from 2019-09-01

12. EN ISO 15118-4 (30 0559) cat.no. 507387	Road vehicles - Vehicle to grid communication interface - Part 4: Conformity test network and application protocol; EN ISO 15118-4:2019; ISO 15118-4:2018; Valid from 2019-09-01

13. EN ISO 15118-5 (30 0559) cat.no. 507388	Road vehicles - Vehicle-to-grid communication interfaces - Part 5: Test for physical conformity layers and data layers; EN ISO 15118-5:2019; ISO 15118-5:2018; Valid from 2019-09-01

14. EN ISO 15118-8 (30 0559) cat.no. 507389	Road vehicles - Vehicle-to-grid communication interfaces - Part 8: Physical requirements layer and a data layer for wireless communication; EN ISO 15118-8:2019; ISO 15118-8:2018; Valid from 2019-09-01

15. ČSN EN 4859 (31 3011) cat.no. 507391	Aviation and Aerospace - Sensor-based clamp load determination for bolts with high tensile strength - Technical Specifications; EN 4859:2019; Valid from 2019-09-01

16. ČSN EN 2288 (31 4863) cat.no. 507390	Aviation and Aerospace - Bearing bushings with stainless steel flange with self-lubricating lining - Dimensions and load capacities; EN 2288:2019; Valid from 2019-09-01 Its promulgation repeals
EN 2288 (31 4863)	Aerospace. Bearing bushings with flange made of stainless steel with self-lubricating lining. Dimensions and load capacities; Issue: December 1995

17. ČSN EN 50549-1 (33 0127) cat.no. 507394	Requirements for Generating sets connected in parallel with distribution networks - Part 1: Connection to LV distribution network - Production plants up to and including type B; EN 50549-1:2019; EN 50549-1:2019/AC:2019; Valid from 2019-09-01 With effect from 2022-02-01 is repealed
CSN EN 50438 ed. 2 (33 0127)	Requirements for parallel connection of microgenerators with public low-voltage distribution networks; Issue: September 2014

18. ČSN EN 50549-2 (33 0127) cat.no. 507393	Requirements for Generating sets connected in parallel with distribution networks - Part 2: Connection to Medium Voltage Distribution Network - Generating stations up to and including type B⁺⁾; EN 50549-2:2019; EN 50549-2:2019/AC:2019; Valid from 2019-09-01

19. ČSN EN 50341-2-24 (33 3300) cat.no. 507392	Electric outdoor lines with voltage above AC 1 kV - National normative aspects (NNA) for Romania (based on EN 50341-1:2012); EN 50341-2-24:2019; Valid from 2019-09-01

20. EN IEC 60947-4-1 ed. 4 (35 4101) cat.no. 507606	Switching and control Low-voltage apparatus - Part 4-1: Contactors and motor starters - Part 4-1: Motor starters Electromechanical contactors and motor starters; EN IEC 60947-4-1:2019; IEC 60947-4-1:2018; Valid from 2019-09-01 With effect from 2022-03-22 is repealed
EN 60947-4-1 ed. 3 (35 4101)	Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor starters - Electromechanical contactors and motor starters; Release date: December 2010

21. CHSN P CEN ISO/TS 21805 (38 9251) cat.no. 507396	Instructions for design, selection and installation of vents to maintain integrity construction of enclosed spaces protected by gas extinguishing equipment; CEN ISO/TS 21805:2019; ISO/TS 21805:2018; Valid from 2019-09-01

22. EN ISO 683-3 (42 0931) cat.no. 507398	Steel for thermal Processing, alloy and automatic steels - Part 3: Steels for carburizing with subsequent clouding; EN ISO 683-3:2019; ISO 683-3:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 683-3 (42 0931)	Heat treatment steels, alloy steels and steels Automatic machines - Part 3: Steel for carburizing with subsequent quenching; Announced: January 2019

23. EN 707 (47 0625) cat.no. 507399	Agricultural machinery - Kaiders - Safety⁺⁾; EN 707:2018; Valid from 2019-09-01 Its promulgation repeals
EN 707+A1 (47 0625)	Agricultural machinery - Graders - Safety; Issue: January 2010

24. ČSN EN 17228 (64 0515) cat.no. 507638	Plastics - Polymers, Plastics and plastic products made of biological material - Terminology, characteristics and reporting; EN 17228:2019; Valid from 2019-09-01 Its promulgation repeals
CCN P CEN/TS 16137 (64 0260)	Plastics - Determination of natural carbon content; Announced: October 2011
CCN P CEN/TS 16295 (64 0261)	Plastics - Declaration of natural carbon content; Declared: February 2013
CCN P CEN/TS 16398 (64 0515)	Plastics - Content reporting and notification template Biocarbon and reuse of biopolymers and bioplastics - Datasheet; Announced: November 2013

25. EN ISO 21301-1 (64 3040) cat.no. 507635	Plastics - Ethylene vinyl acetate (EVAC) for forming - Part 1: Labelling system and fundamentals for specifications; EN ISO 21301-1:2019; ISO 21301-1:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 4613-1 (64 3040)	Plastics - Ethylene vinyl acetate (E/VAC) for moulding - Part 1: Marking and specifications; Issue: February 2000

26. EN ISO 21301-2 (64 3040) cat.no. 507634	Plastics - Ethylene vinyl acetate (EVAC) for forming - Part 2: Preparation of test pieces and determination of properties; EN ISO 21301-2:2019; ISO 21301-2:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 4613-2 (64 0217)	Plastics - Ethylene vinyl acetate (E/VAC) materials for forming and extrusion - Part 2: Test-body preparation and determination properties; Issue: August 1997

27. EN ISO 21309-1 (64 3901) cat.no. 507641	Plastics - Copolymers Ethylene vinyl alcohol (EVOH) for forming - Part 1: Labelling system and fundamentals for specifications; EN ISO 21309-1:2019; ISO 21309-1:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 14663-1 (64 3901)	Plastics - Copolymers of ethylene vinyl alcohol (EVOH) for forming - Part 1: Marking system and basis for specifications; Announced: November 2006

28. EN ISO 21309-2 (64 3901) cat.no. 507642	Plastics - Copolymers Ethylene vinyl alcohol (EVOH) for forming - Part 2: Test-body preparation and determination of properties; EN ISO 21309-2:2019; ISO 21309-2:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 14663-2 (64 3901)	Plastics - Copolymers of ethylene vinyl alcohol (EVOH) for forming - Part 2: Preparation of test pieces and determination of properties; Announced: November 2006

29. EN ISO 21305-1 (64 4420) cat.no. 507636	Plastics - Materials Polycarbonate (PC) for moulding - Part 1: Labelling system and basis for Specifications; EN ISO 21305-1:2019; ISO 21305-1:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 7391-1 (64 4420)	Polycarbonate (PC) materials for moulding and extrusion - Part 1: Marking system and basis for specifications; Announced: September 2006

30. EN ISO 21305-2 (64 4420) cat.no. 507637	Plastics - Materials Polycarbonate (PC) for moulding - Part 2: Preparation of test pieces and determination of properties; EN ISO 21305-2:2019; ISO 21305-2:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 7391-2 (64 4420)	Polycarbonate (PC) materials for moulding and extrusion - Part 2: Preparation of test pieces and determination of properties; Announced: September 2006

31. EN ISO 20558-1 (64 5706) cat.no. 507639	Plastics - Polyphenylene sulphides (PPS) for forming - Part 1: Labelling system and fundamentals for specifications; EN ISO 20558-1:2019; ISO 20558-1:2018; Valid from 2019-09-01

32. EN ISO 20558-2 (64 5706) cat.no. 507640	Plastics - Polyphenylene sulphides (PPS) for forming - Part 2: Preparation of test bodies and determination of properties; EN ISO 20558-2:2019; ISO 20558-2:2018; Valid from 2019-09-01

33. P CEN ISO/TS 15875-7 (64 6413) cat.no. 507631	Plastic piping Hot and cold water distribution systems - Cross-linked polyethylene (PE-X) - Part 7: Guidance for conformity assessment; CEN ISO/TS 15875-7:2018; ISO/TS 15875-7:2018; Valid from 2019-09-01 Its promulgation repeals
HSN P CEN ISO/TS 15875-7 (64 6413)	Plastic piping systems for hot and cold water distribution - Cross-linked polyethylene (PE-X) - Part 7: Guidelines for the assessment of conformity; Release date: November 2006

34. CCN P CEN ISO/TS 15877-7 (64 6414) cat.no. 507630	Plastic piping Hot and cold water distribution systems - Chlorinated polyvinyl chloride (PVC-C) - Part 7: Guidance on conformity assessment; CEN ISO/TS 15877-7:2018; ISO/TS 15877-7:2018; Valid from 2019-09-01 Its promulgation repeals
HSN P CEN ISO/TS 15877-7 (64 6414)	Plastic piping systems for hot and cold water distribution - Chlorinated polyvinyl chloride (PVC-C) - Part 7: Assessment guidelines Compliance; Issue: April 2010

35. CCN P CEN ISO/TS 15876-7 (64 6416) cat.no. 507632	Plastic piping Hot and cold water distribution systems - Polybutene (PB) - Part 7: Instructions for use conformity assessment; CEN ISO/TS 15876-7:2018; ISO/TS 15876-7:2018; Valid from 2019-09-01 Its promulgation repeals
CCN P CEN ISO/TS 15876-7 (64 6416)	Plastic piping systems for hot and cold water distribution - Polybutene (PB) - Part 7: Guidelines for conformity assessment; Issue: November 2006

36. HSN P CEN ISO/TS 22391-7 (64 6425) cat.no. 507633	Plastic piping Hot and cold water distribution systems - Polyethylene resistant to elevated to temperatures (PE-RT) - Part 7: Guidance on conformity assessment; CEN ISO/TS 22391-7:2018; ISO/TS 22391-7:2018; Valid from 2019-09-01 Its promulgation repeals
HSN P CEN ISO/TS 22391-7 (64 6425)	Plastic piping systems for hot and cold water distribution - High temperature resistant polyethylene (PE-RT) - Part 7: Guidelines for Conformity assessment; Announced: June 2012

37. EN 12310-2 (72 7636) cat.no. 507650	Waterproofing strips and foils - Determination of resistance to tearing - Part 2: Plastic and rubber strips and foils for roof waterproofing; EN 12310-2:2018; Valid from 2019-09-01 Its promulgation repeals
EN 12310-2 (72 7636)	Waterproofing tapes and sheets - Determination of resistance to bursting - Part 2: Plastic and rubber strips and sheets for waterproofing Roofs; Issue: May 2001

38. EN 16002 (72 7658) cat.no. 507651	Waterproofing strips and foils - Determination of wind load resistance of mechanically anchored strips and foils for roof waterproofing; EN 16002:2018; Valid from 2019-09-01 Its promulgation repeals
EN 16002 (72 7658)	Waterproofing tapes and sheets - Determination of resistance to wind loads on mechanically anchored strips and membranes for roof waterproofing; Release date: October 2010

39. ČSN EN 17087 (72 8014) cat.no. 507424	Building products - Assessment of the release of hazardous substances - Preparation of laboratory test equipment sample for release testing and content analysis; EN 17087:2019; Valid from 2019-09-01

40. EN 15269-1 (73 0868) cat.no. 508171	Extended application the results of fire and/or smoke resistance tests on door assemblies, closures and opening windows, including their hardware - Part 1: General requirements⁺⁾; EN 15269-1:2019; Valid from 2019-09-01 Its promulgation repeals
EN 15269-1 (73 0868)	Extended application of fire resistance test results and/or the smoke-tightness of door assemblies, closures and opening windows, including their Building hardware components - Part 1: General requirements; Issue: July 2010

41. EN 13146-1 (73 6375) cat.no. 507427	Railway applications - Railway tracks - Methods of testing fastening systems - Part 1: Determination of resistance to longitudinal displacement of the rail; EN 13146-1:2019; Valid from 2019-09-01 Its promulgation repeals
EN 13146-1+A1 (73 6375)	Railway applications - Railways - Methods of testing systems fixings - Part 1: Determination of resistance to longitudinal rail displacement; Release date: May 2015

42. EN 13146-7 (73 6375) cat.no. 507426	Railway applications - Railway applications - Methods of testing fastening systems - Part 7: Determination of clamping force and rigidity against lifting; EN 13146-7:2019; Valid from 2019-09-01 Its promulgation repeals
EN 13146-7 (73 6375)	Railway applications - Railways - Methods of testing systems Fasteners - Part 7: Determination of clamping force; Issue: January 2013

43. EN 17075 (75 7060) cat.no. 507431	Water quality - General requirements and performance test procedures for water monitoring equipment - Measuring equipment; EN 17075:2018; Valid from 2019-09-01

44. EN 12873-3 (75 7333) cat.no. 507434	Influence of materials on Water intended for human consumption - Effects of migration - Part 3: Test method for Ionex resins and sorbents; EN 12873-3:2019; Valid from 2019-09-01 Its promulgation repeals
EN 12873-3 (75 7333)	Impact of materials on water for human consumption - Impact Migration - Part 3: Test method for ionex resins and sorbents; Edition: September 2006

45. HSN EN ISO 11704 (75 7608) cat.no. 507433	Water quality - Measurement of total volume activity alpha and total volume activity beta - Liquid scintillation measurement method; EN ISO 11704:2018; ISO 11704:2018; Valid from 2019-09-01 Its promulgation repeals
EN ISO 11704 (75 7608)	Water quality - Measurement of total alpha activity and total Beta activity in non-saline waters - Liquid scintillation measurement method; Announced: February 2016

46. HSN EN ISO 10634 (75 7776) cat.no. 507432	Water quality - Guidelines for the preparation and treatment of organic substances which are not readily soluble in water for the following assessment of their biodegradability in aquatic environment⁺⁾; EN ISO 10634:2018; ISO 10634:2018; Valid from 2019-09-01 Its promulgation repeals
EN ISO 10634 (75 7776)	Water quality - Guidelines for preparation and treatment in water of poorly soluble organic substances for the following evaluation of their Biodegradability in the aquatic environment; Issue: March 1997

47. EN 17123 (75 7788) cat.no. 507429	Water quality - Instructions to determine the degree of modification of the hydromorphological characteristics of the transition and coastal waters; EN 17123:2018; Valid from 2019-09-01

48. EN 14701-4 (75 8061) cat.no. 507430	Characterisation of sludge - Filtration properties - Part 4: Determination of drainability of flocculated sludge; EN 14701-4:2018; Valid from 2019-09-01 Its promulgation repeals
EN 14701-4 (75 8061)	Characterisation of sludges - Filtration properties - Part 4: Determination Dewaterability of flocculated sludge; Issue: August 2010

49. EN 17177 (77 1039) cat.no. 507436	Glass packaging - Bead cap - Bead cap with a diameter of 26 mm and a height of 6 mm; EN 17177:2019; Valid from 2019-09-01

50. EN 343 (83 2761) cat.no. 507674	Protective clothing - Protection against rain⁺⁾; EN 343:2019; Valid from 2019-09-01 Its promulgation repeals
EN 343+A1 (83 2761)	Protective clothing - Rain protection; Issue: March 2008

51. EN ISO 19115-2 (97 9834) cat.no. 507465	Geographic Information - Metadata - Part 2: Extensions for display and grid data; EN ISO 19115-2:2019; ISO 19115-2:2019; Valid from 2019-09-01 Its promulgation repeals
EN ISO 19115-2 (97 9834)	Geographic information - Metadata - Part 2: Extensions for display data and grid data; Release: September 2010

CHANGES TO CSN

52. EN 50504 (05 2203) cat.no. 508035	Device validation for arc welding; Announced: January 2009 Change Z1; Applicable as of 2019-09-01 EN IEC 60974-14 (05) applies in parallel with this standard. 2205) of August 2019, which will completely replace this standard from 2021-11-23.

53. ČSN EN 61051-1 (35 8080) cat.no. 508136	Varistors for use in electronic equipment - Part 1: Generic specification; Announced: July 2009 Change Z1; Applicable as of 2019-09-01 In parallel with this standard, EN IEC 61051-1 ed. 2 (35 8080) of August 2019, which will completely replace this standard from 2021-12-03.

Czech Agency for
standardization

Director of the Department
Standardization

Zdeňka Slaná v. r.

NOTICE No 73/19

Office for Technical Standardization, Metrology and State Testing

information on
start of drafting of Czech technical standards

On the basis of § 6
Act No. 22/1997 Coll. publishes the Office for Technical Standardization, Metrology and
state testing of the list of tasks for the creation of Czech technical standards, newly
included in the plan.

Anyone who has
interest in becoming a participant in the comment procedure on the proposals of specific Czech
of the technical standards, let them apply within 4 weeks after publication to the compiler
the address of which is given in the list below, or by
email at normalizace@agentura-cas.cz.

Draft CSNs may
processors to the participants (except for the relevant ministries or other
central administrative authorities and the relevant technical standardisation commissions)
provide for overhead costs (reproduction, postage).

At the same time
points out that the tasks of creating Czech technical standards can only be handled by
organization or citizen with whom the Office for Technical Standardization, Metrology and
state testing through the Czech Agency for Standardization, s. p. o,
agreed upon and for which the commencement of work was announced in the Bulletin of the Ministry of Industry and Trade, with an indication of
Processor. Draft Czech technical standards for which both of these conditions would
have not been met, they cannot be approved.

For tasks
marked with *) is presumed to be an adoption of a European or international standard by adopting
original according to 7.3.2 of MPN 1:2011.

For tasks marked
**) the European standard is assumed to be adopted by approval for direct use as
CSN according to 7.3.3 MPN 1:2011.

Task number	Title	Dates Start exit	Processor - address
1	2	3	4
01/0063/19 TNK: 7	Product Geometric Specifications (GPS) - Layout geometric characteristics for production control International documents referenced:EN ISO 20170:2019 + ISO 20170:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
01/0064/19 TNK: 80	Non-destructive testing - Eddy current testing - General principles International documents referenced:EN ISO 15549:2019 + ISO 15549:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory Organization Biskupský dvůr 1148/5 Prague 1 110 00
01/0065/19 TNK: 106	Greenhouse gases - Part 2: Specification with guidance for the determination, monitoring and reporting of emission reductions or increases in sinks greenhouse gases for projects International documents referenced:EN ISO 14064-2:2019 + ISO 14064-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
01/0066/19 TNK: 1	Drawings of civil engineering structures - Displaying modular dimensions, lines and networks International documents referenced:EN ISO 8560:2019 + ISO 8560:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
01/0067/19 TNK: 106	Greenhouse gases - Part 3: Specification with guidance for validation and verification of greenhouse gas claims International documents referenced:EN ISO 14064-3:2019 + ISO 14064-3:2019	19-08 19-10	Ivana Petrašová, dpt. Palackého str. 2541/100 Brno 12 - Královo Pole 612 00
03/0015/19 TNK: -	Anodic oxidation of aluminium and its alloys - Determination electrical breakdown voltage International documents referenced:EN ISO 2376:2019 + ISO 2376:2019	19-09 19-11	Ing. Miloslav Smetana Šumperská 356 Praha 18 - Letňany 199 00
05/0034/19 TNK: 70	Welding materials - Wire electrodes, filled electrodes and electrode-fusion combinations for arc welding of refractory steels under flux - Classification International documents referenced:EN ISO 24598:2019 + ISO 24598:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
05/0035/19 TNK: 70	Welding consumables - Arc welding fluxes under Flux cored and electric arc welding - Classification International documents referenced:EN ISO 14174:2019 + ISO 14174:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
06/0008/19 TNK: 26	Test gases - Test pressures - Appliance categories International Document Adopted: EN 437:2018	19-09 19-11	Engineering Testing Institute, s.p. Hudcova 424/56b Brno 621 00
07/0005/19 TNK: 103	LPG equipment and accessories - Terminology International document adopted: CEN/TS 16769:2019 (TDG) **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
07/0006/19 TNK: 103	LPG equipment and accessories - Safety valves for LPG pressure vessels - Accessories International documents referenced:EN 14071:2015+A1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
08/0003/19 TNK: 48	Water turbines, storage pumps and pump turbines - Acceptance tests on the model FprEN IEC 60193:2018 + IEC 60193:2019 *)	19-09 19-11	Litostroj Engineering a.s. Capkova 2357/5 Blansko 678 01
11/0002/19 TNK: -	Pumps - Methods of qualification and verification of the energy index Efficiency of hydrodynamic pump units - Part 2: Testing and calculation the energy efficiency index (EEI) of each pump unit International document adopted: EN 17038-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
11/0003/19 TNK: -	Pumps - Methods of qualification and verification of the energy index Efficiency of hydrodynamic pump units - Part 1: General requirements and testing procedures and calculation of the Energy Efficiency Index (EEI) International document adopted: EN 17038-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
11/0004/19 TNK: 62	Connections for hydraulic equipment and general use - Bore inlets and end caps with metric threads according to ISO 261 sealed O-rings - Part 1: Tapered entry holes for seals O-ring International documents referenced:EN ISO 6149-1:2019 + ISO 6149-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
13/0008/19 TNK: 50	Industrial valves - Requirements and testing of metallic valves as pressure equipment International documents referenced:EN 16668:2016+A1:2018 (PEAD)	19-08 19-11	RNDr. Bohdan Kratochvíl, Ph.D. Banskobystrická 663/153 Brno - Řečkovice 621 00
13/0009/19 TNK: 50	Safety relief devices against excessive pressure - Part 2: Safety devices with rupture disk International documents referenced:EN ISO 4126-2:2019 + ISO 4126-2:2018	19-08 19-11	RNDr. Bohdan Kratochvíl, Ph.D. Banskobystrická 663/153 Brno - Řečkovice 621 00
14/0006/19 TNK: 112	Air conditioners, liquid cooling units, heat pumps, process chillers and dehumidifiers with electrically driven Compressors - Determination of sound power level - Part 2: Heat pumps as water heaters International document adopted: EN 12102-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
18/0012/19 TNK: 56	Industrial communication networks - Installation of communication networks in industrial plants International document adopted: EN IEC 61918/A11:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
22/0001/19 TNK: 111	Safety requirements for superabrasive tools International document adopted: EN 13236:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
25/0010/19 TNK: -	Communication systems for meters - Part 4: Wireless M-Bus communication International document adopted: EN 13757-4:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
25/0011/19 TNK: -	Heat meters - Part 6: Installation, commissioning, activity monitoring and maintenance International documents referenced:EN 1434-6:2015+A1:2019	20-01 20-01	RNDr. Bohdan Kratochvíl, Ph.D. Banskobystrická 663/153 Brno - Řečkovice 621 00
25/0012/19 TNK: -	Gas Meters - Rotary Volume Gas Meters International Document Adopted: EN 12480:2018	20-01 20-01	RNDr. Bohdan Kratochvíl, Ph.D. Banskobystrická 663/153 Brno - Řečkovice 621 00
25/0013/19 TNK: -	Heat meters - Part 5: Tests for initial verification International documents referenced:EN 1434-5:2015+A1:2019	20-01 20-01	RNDr. Bohdan Kratochvíl, Ph.D. Banskobystrická 663/153 Brno - Řečkovice 621 00
27/0012/19 TNK: 143	Safety requirements for passenger cableways - Inspection pre-commissioning, maintenance, operational checks and tests International Document Adopted: EN 1709:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
27/0013/19 TNK: 143	Safety requirements for cableway installations - Ropes International document adopted: EN 12927:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
27/0014/19 TNK: 123	Cranes - Crane Working Time Monitoring International document adopted: ISO 12482:2014 *)	19-07 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
27/0015/19 TNK: 143	Safety requirements for passenger cableways - Inspection pre-commissioning, maintenance, operational checks and tests International Document Adopted: EN 1709:2019	19-08 19-11	Union of the Elevator Industry of the Czech Republic Lamb 2 Prague 2 120 00
28/0030/19 TNK: 141	Railway applications - Braking - Switchgear and brake switches International document adopted: EN 15355:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
28/0031/19 TNK: 141	Railway applications - Driver's cab - Part 4: Design and approach International document adopted: EN 16186-4:2019 (RAIL) **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
30/0011/19 TNK: -	Road vehicles - Vehicle to vehicle communication interface over the power grid - Part 1: General information and use case definitions International documents referenced:EN ISO 15118-1:2019 + ISO 15118-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0066/19 TNK: -	Aerospace - Spherical plain bearings from stainless steel with wider inner ring, metal to metal - Dimensions and load capacity - Inch series International document adopted: EN 6097:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0067/19 TNK: -	Aerospace - Spherical plain bearings from stainless steel with self-lubricating lining and wider inner ring - Dimensions and load capacities - Inch series International document adopted: EN 6096:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0068/19 TNK: -	Aerospace - Adjustable bearing eyes according to EN 4265 Stainless steel, threaded shank - Dimensions and load capacities - Inch series International document adopted: EN 6055:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0069/19 TNK: -	Aerospace - Adjustable bearing eyes according to EN 4614 stainless steel with self-lubricating lining, threaded shank - Dimensions and load capacities - Inch series International document adopted: EN 6056:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0070/19 TNK: -	Aerospace - Adjustable bearing eyes according to EN 6097 stainless steel, with wider inner ring, threaded shank - Dimensions and load capacities - Inch series International document adopted: EN 6098:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory Organization Biskupský dvůr 1148/5 Prague 1 110 00
31/0071/19 TNK: -	Aerospace - Adjustable bearing eyes according to EN 6096 stainless steel, with self-lubricating lining and wider inner ring, with threaded shank - Dimensions and load capacities - Inch series International document adopted: EN 6133:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0072/19 TNK: -	Aerospace - Bolts with MJ thread, alloy Titanium TI-P64001 - Grade: 1 100 MPa (at ambient temperature) - Technical Specifications International document adopted: EN 3818:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0073/19 TNK: -	Aerospace - Cable gland accessories for circular and rectangular electrical and optical connectors - Part 005: Cable Type A outlet, 90°, unsealed, with cable tension retaining clamp - Standard product International documents referenced:EN 3660-005:2018+AC:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0074/19 TNK: -	Aerospace - Connecting pipe fittings 8°30' to 28,000 kPa - Dynamic Sealing - Metric Series - Technical Specifications International document adopted: EN 3275:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0075/19 TNK: -	Aerospace - Screws with MJ thread, from heat resistant nickel alloy HI-PH2601 (Inconel 718) - Grade: 1 275 MPa (at ambient temperature) / 650 °C - Technical specification International document adopted: EN 2583:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
31/0076/19 TNK: -	Aerospace - Washers, bevelled, cylindrical recessed, made of alloy steel, cadmium plated International document adopted: EN 2414:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
33/0031/19 TNK: 97	Wind turbines - Part 3-1: Design requirements for stationary offshore wind power plants FprEN IEC 61400-3-1:2018 + IEC 61400-3-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
33/0032/19 TNK: 97	Application integration in energy companies - System interfaces for power management - Part 4: Interfaces for the management of records (reports) and assets International documents referenced:EN IEC 61968-4:2019 + IEC 61968-4:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
33/0034/19 TNK: 124	Surveillance and alarm receiving centres International document referenced:FprEN 50518:2018	19-08 19-10	Association of Technical Security Services Grémium Alarm z.s. Na Florenci 2116/15 Prague 1 110 00
33/0035/19 TNK: 97	Overhead power lines with a voltage above 1 kV AC - Part 2-2: National normative aspects (NNA) for Belgium (based on EN 50341-1:2012) International document adopted: EN 50341-2-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory Organization Biskupský dvůr 1148/5 Prague 1 110 00
33/0036/19 TNK: 21	International Electrotechnical Dictionary - Chapter 442: Electrical accessories International document adopted: IEC 60050-442/A3:2019 *)	19-08 19-10	Medit Consult s.r.o. Dr. Milady Horákové 5/1086 Olomouc 772 00
33/0037/19 TNK: 97	Overhead power lines with a voltage above 1 kV AC - Part 2-4: National Normative Aspects (NNA) for Germany (based on EN 50341-1:2012) International document adopted: EN 50341-2-4:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
33/0038/19 TNK: 97	Overhead power lines over 1 kV AC - Part 2-15: National Normative Aspects (NNA) for the Netherlands (based on EN 50341-1:2012) International document adopted: EN 50341-2-15:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
33/0039/19 TNK: 22	Effects of current on humans and domestic animals - Part 2: Special considerations International document adopted: IEC 60479-2:2019	19-10 20-01	Medit Consult s.r.o. Dr. Milady Horákové 5/1086 Olomouc 772 00
34/0028/19 TNK: 97	Insulators for overhead lines - Composite support insulators for lines with a rated AC voltage exceeding 1 000 V - Part 1: Definitions, end fittings and marking International documents referenced:EN IEC 61952-1:2019 + IEC 61952-1:2019 *)	19-06 19-10	Association of High Voltage Testing Laboratories, z.s. - AZVN, z.s. Business 267 Prague 9 - Běchovice 190 11
34/0029/19 TNK: 110	Specification for the reuse of sulphur hexafluoride (SF₆) and mixtures thereof in electrical equipment International documents referenced:EN IEC 60480:2019 + IEC 60480:2019	19-07 19-10	Association of High Voltage Testing Laboratories, z.s. - AZVN, z.s. Business 267 Prague 9 - Běchovice 190 11
35/0054/19 TNK: 98	Calibration of optical power meters for fibre optics International documents referenced:EN IEC 61315:2019 + IEC 61315:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
35/0055/19 TNK: 98	Fiber optic connectors and passive components - Optical connector interfaces - Part 7-3: MPO type optical connectors - Two rows of 16-fibre width fibres International documents referenced:EN IEC 61754-7-3:2019 + IEC 61754-7-3:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
35/0056/19 TNK: 98	Optical fibre cables - Part 2-31: Indoor cables - Subject specification for fibre optic ribbon cables for indoor building cabling International documents referenced:EN IEC 60794-2-31:2019 + IEC 60794-2-31:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
35/0057/19 TNK: 98	Optical fibre cables - Part 2-11: Indoor cables - Subject specification for simplex and duplex cables for indoor cabling buildings International documents referenced:EN IEC 60794-2-11:2019 + IEC 60794-2-11:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
35/0058/19 TNK: 102	Semiconductor components - Mechanical and climatic tests - Part 18: Ionising radiation (total dose) International documents referenced:EN IEC 60749-18:2019 + IEC 60749-18:2019 *)	19-08 19-10	BUT Brno - Faculty of Electrical Engineering and Communication technology Technical 3058/10 Brno 616 00
35/0059/19 TNK: 97	High-voltage switchgear and controlgear - Part 109: Parallel AC switches of series capacitors International documents referenced:EN IEC 62271-109:2019 + IEC 62271-109:2019 *)	19-08 19-10	Ing. Ivan Hála Krondlova 508/16 Brno - Žabovřesky 616 00
35/0060/19 TNK: 98	Optical fibre cables - Part 2-21: Indoor cables - Subject specification for optical multi-fibre distribution cables for internal cabling of buildings International documents referenced:EN IEC 60794-2-21:2019 + IEC 60794-2-21:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
35/0061/19 TNK: 98	Fibre management systems and protective encapsulation used in optical fibre communication systems - Specifications Product - Part 4-1: Passive optical enclosure for category A International document adopted:FprEN 50411-4-1:2019 *)	19-09 19-11	SQS Vláknová optika a.s. Comenius 304 Nová Paka 509 01
35/0062/19 TNK: 98	Fibre management systems and protective encapsulation used in optical fibre communication systems - Specifications Product - Part 3-4: Wall-mounted junction boxes for connecting jumper cables, for category C and A International document adopted:FprEN 50411-3-4:2019 *)	19-09 19-11	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
35/0063/19 TNK: 126	Very high voltage direct current power transmission (HVDC) - Dictionary International documents referenced: prEN 60633:2018 + IEC 60633:2019 *)	19-07 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
36/0048/19 TNK: 33	Household and similar electrical appliances - Test code for the determination of airborne noise - Part 2-14: Particular requirements for refrigerators, frozen food preservers and freezers International documents referenced:EN 60704-2-14/A1:2019 + IEC 60704-2-14/A1:2019	19-08 19-10	Ing. Petr Voda Rataje 212 Hlinsko in Bohemia 539 01
36/0049/19 TNK: 127	Safety of laser equipment - Part 12: Safety spatial optical communication systems used for information transmission International documents referenced:EN IEC 60825-12:2019 (LVD2, RTTED) + IEC 60825-12:2019	19-07 19-09	Ing. Jiří Hrazdil Vranovská 362/20 Brno 14 614 00
36/0050/19 TNK: 81	Medical electrical apparatus - Part 2-54: Particular requirements for the basic safety and essential functionality of X-ray equipment for sciagraphy and skiascopy International documents referenced:EN 60601-2-54/A2:2019 + IEC 60601-2-54/A2:2018	19-07 19-09	Ing. David Korpas, Ph.D. Embankment 772/8 Olomouc 772 00
36/0051/19 TNK: 67	Light sources for road vehicles - Dimensional, electrical and lighting requirements International documents referenced EN 60809/A3:2019 + IEC 60809/A3:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
36/0052/19 TNK: 20	Information Technology - Security Techniques - Framework Privacy International document adopted: ISO/IEC 29100/Amd.1:2018	19-07 19-09	Ing. Alena Hönigová S. K. Neumann 7a/2012 Prague 8 182 00
36/0053/19 TNK: 67	Control gear for light sources - Part 2-7: Particular requirements for battery-powered electronic control devices for emergency lighting (with own batteries) International documents referenced EN 61347-2-7:2012/FprA1:2017 (LVD3, RED) + IEC 61347-2-7/A1:2017	19-07 19-10	Ing. Jitka Machatá, CSc. Foreplay 4/289 Prague 6 - Veleslavín 162 00
36/0054/19 TNK: 33	Tumble dryers for household use - Methods of measuring function International documents referenced:EN 61121:2013/FprAA:2018 (ECOTUD, EL2, ELTUMB)	19-08 19-10	Ing. Petr Voda Rataje 212 Hlinsko in Bohemia 539 01
36/0055/19 TNK: 67	Light sources and LED components for road vehicles - Requirements for execution International documents referenced:EN IEC 60810/A1:2019 + IEC 60810/A1:2019 *)	19-08 19-10	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
36/0056/19 TNK: 42	Multilingual biometric dictionary based on the English Version ISO/IEC 2382-37:2012 International Document Adopted: EN 17054:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
36/0057/19 TNK: 113	Safety of lithium primary and battery cells and batteries during transport International documents referenced:EN IEC 62281:2019 + IEC 62281:2019	19-07 19-10	JBS, s.r.o. Ovčí hájek 2155/6 Prague 5 - Stodůlky 158 00
36/0058/19 TNK: 33	Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for non-portable cookers, cooking panels, ovens and similar appliances International documents referenced: EN 60335-2-6:2015/prA1:2016 (LVD3, RED) + EN 60335-2-6:2015/FprAA:2019 (LVD3) + IEC 60335-2-6/A1:2018	19-08 19-10	Ing. Petr Voda Rataje 212 Hlinsko in Bohemia 539 01
37/0002/19 TNK: 121	Electrical equipment for the detection of combustible gases in dwellings Buildings - Part 2: Electrical apparatus for permanent operation in fixed installations in recreational vehicles and similar premises - Additional test methods and functional requirements International Document Adopted: EN 50194-2:2019	19-09 19-10	Physical Technical Testing Institute, state enterprise Pikartská 1337/7 Ostrava -Radvanice 716 07
38/0014/19 TNK: 132	Stable extinguishing systems - Sprinkler extinguishing systems in Buildings for housing - Design, installation and maintenance International Document Adopted: EN 16925:2018	20-01 20-03	PAVUS, a.s. Prosecká 412/74 Prague 9 190 00
38/0015/19 TNK: 132	Fire extinguishing masks International document adopted: FprEN 1869 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
38/0016/19 TNK: 132	Manually operated fire jets - Part 1: General requirements International document adopted: FprEN 15182-1 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
38/0017/19 TNK: 132	Manually operated fire jets - Part 2: Combination flow lines PN 16 International document adopted: FprEN 15182-2 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
38/0018/19 TNK: 132	Manually operated fire jets - Part 4: High pressure flow lines PN 40 International document adopted: FprEN 15182-4 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
38/0019/19 TNK: 132	Manually operated fire sprinklers - Part 3: Full current and/or shower nozzles with one fixed angle PN 16 International document adopted: FprEN 15182-3 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
38/0020/19 TNK: 55	Gas pressure regulators for inlet pressure up to 10 MPa (100 bar) including International document adopted: FprEN 334 (new) **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0025/19 TNK: 62	Cold-formed hollow welded profiles of structural Steels - Part 2: Deflection limits, dimensions and geometrical characteristics of cross-sections International document adopted: EN 10219-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0026/19 TNK: 62	Hot-formed hollow sections of structural steel - Part 2: Limit deviations, dimensions and geometric characteristics of the cross-section International document adopted: EN 10210-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0027/19 TNK: 62	Weldable structural steels for anchored petroleum equipment Offshore - Technical delivery conditions - Part 4: Cold-formed welded hollow profiles International document adopted: EN 10225-4:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0028/19 TNK: -	Weldable structural steels for anchored petroleum equipment Offshore - Technical delivery conditions - Part 3: Hot-formed hollow Profiles International document adopted: EN 10225-3:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory Organization Biskupský dvůr 1148/5 Prague 1 110 00
42/0029/19 TNK: 62	Weldable structural steels for anchored petroleum equipment Offshore - Technical delivery conditions - Part 2: Profiles International document adopted: EN 10225-2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0030/19 TNK: 62	Weldable structural steels for anchored petroleum equipment Offshore - Technical delivery conditions - Part 1: Sheets International document adopted: EN 10225-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0031/19 TNK: 64	Metal powders - Determination of oxygen content by reduction methods - Part 4: Determination of total oxygen content by reductive extraction International documents referenced:EN ISO 4491-4:2019 + ISO 4491-4:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
42/0032/19 TNK: 62	Stainless steel castings International Document Adopted: EN 10283:2019	19-07 19-09	Ing. Jan Weischera - DWV Bushradská 98 Kladno 3 272 03
49/0006/19 TNK: -	Ladders - Part 3: Markings and instructions for use International Document Adopted: EN 131-3:2018	19-07 19-09	Ivana Petrašová, dpt. Palackého str. 2541/100 Brno 12 - Královo Pole 612 00
49/0007/19 TNK: 111	Safety of woodworking machines - Exhaust systems chips and dust for indoor installation - Safety requirements International document adopted: EN 16770:2018	20-01 20-01	Association of Engineering Technology Political Prisoners 1419/11 Prague 1 113 42
63/0006/19 TNK: 23	Clamping (mechanical) couplings for hot steam hoses for pressures up to 18 bar International documents referenced:EN 14423:2013+A2:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
64/0049/19 TNK: 131	Plastic piping systems for non-pressure sewerage Connections and sewerage networks buried in the ground - Unplasticized polyvinyl chloride (PVC-U) - Part 1: Specifications for pipes, fittings and system International document adopted: FprEN 1401-1	19-08 19-10	Institute for Testing and Certification, a.s. tr. Tomas Bata 299 Zlín - Louky 763 02
65/0013/19 TNK: -	Fertilizers - Extraction of total trace nutrients in fertiliser with royal meadow grass International Document Adopted: EN 16964:2018	19-08 19-10	Kateřina Šléglová Oblá 461/83 Brno, Nový Lískovec 634 00
65/0014/19 TNK: -	Fertilizers - Extraction of water-soluble trace nutrients in fertilisers and the removal of organic matter from fertiliser extracts International Document Adopted: EN 16962:2018	19-08 19-10	Kateřina Šléglová Oblá 461/83 Brno, Nový Lískovec 634 00
65/0027/19 TNK: 118	Petroleum products - Determination of aromatic hydrocarbon groups in middle distillates - High performance liquid chromatography with refractometric detection International document adopted: EN 12916:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
65/0028/19 TNK: -	Soil liming materials - Determining the need for liming - Method with ammonium acetate buffer solution at pH 5,5 International document adopted: CEN/TS 17338:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
65/0029/19 TNK: 134	Asphalts and asphalt binders - Recovery of binder from Asphalt emulsions, diluted or fluxed asphalt binders - Part 2: Stabilization after recovery by evaporation International Document Adopted: EN 13074-2:2019	19-07 19-09	PRAGOPROJEKT, a.s. K Rysanka 1668/16 Prague 4 147 54
65/0030/19 TNK: 134	Asphalts and asphalt binders - Recovery of binder from Asphalt emulsions, diluted or fluxed asphalt binders - Part 1: Recovery by evaporation International Document Adopted: EN 13074-1:2019	19-07 19-09	PRAGOPROJEKT, a.s. K Rysanka 1668/16 Prague 4 147 54
65/0031/19 TNK: -	Fertilizers and soil liming materials - Glossary - Part 3: Terms relating to soil liming materials International Document Adopted: EN 12944-3:2019	19-08 19-10	Kateřina Šléglová Oblá 461/83 Brno, Nový Lískovec 634 00
65/0032/19 TNK: 118	Petroleum and petroleum products from natural or synthetic sources - Determination of paraffin deposition temperature International document adopted:FprEN ISO 3015 + ISO 3015:2019	19-08 19-10	Czech Engineering Society z.s. Novotného lávka 200/5 Prague 1 110 00
65/0033/19 TNK: 118	Petroleum products - Determination of cloud point - Automatic gradual cooling method International document referenced:FprEN ISO 22995 + ISO 22995:2019	19-08 19-10	Czech Engineering Society z.s. Novotného lávka 200/5 Prague 1 110 00
65/0034/19 TNK: 118	Petroleum and petroleum products from natural or synthetic sources - Determination of the pour point International document adopted:FprEN ISO 3016 + ISO 3016:2019	19-08 19-10	Czech Engineering Society z.s. Novotného lávka 200/5 Prague 1 110 00
67/0012/19 TNK: 32	Powder coatings - Part 1: Determination of distribution particle size by sieve analysis International documents referenced:EN ISO 8130-1:2019 + ISO 8130-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
67/0013/19 TNK: 32	Powder coatings - Part 7: Determination of weight loss during burning International documents referenced:EN ISO 8130-7:2019 + ISO 8130-7:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
67/0014/19 TNK: 32	Powder coatings - Part 11: Creep test after inclined plane International documents referenced:EN ISO 8130-11:2019 + ISO 8130-11:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
67/0015/19 TNK: 32	Powder coatings - Part 12: Determination of compatibility International documents referenced:EN ISO 8130-12:2019 + ISO 8130-12:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
67/0016/19 TNK: 32	Powder coatings - Part 13: Size analysis particles by laser diffraction International documents referenced:EN ISO 8130-13:2019 + ISO 8130-13:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
67/0017/19 TNK: 32	General test methods for pigments and fillers - Part 17: Comparison of the lightening ability of white pigments International documents referenced:EN ISO 787-17:2019 + ISO 787-17:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
67/0018/19 TNK: 32	Coatings and plastics - Determination of non-volatile content substances International document adopted:FprEN ISO 3251 + ISO 3251:2019	19-08 19-10	SVÚOM, s.r.o. At the Town Brewery 934/4 Prague 7 - Holešovice 170 00
67/0019/19 TNK: 32	Powder coatings - Part 14: Terminology International documents referenced:EN ISO 8130-14:2019 + ISO 8130-14:2019	19-07 19-09	SVÚOM, s.r.o. At the Town Brewery 934/4 Prague 7 - Holešovice 170 00
67/0020/19 TNK: 32	Coatings - Determination of resistance to liquids - Part 3: Method using absorbent material International documents referenced:EN ISO 2812-3:2019 + ISO 2812-3:2019	19-07 19-09	SVÚOM, s.r.o. At the Town Brewery 934/4 Prague 7 - Holešovice 170 00
70/0002/19 TNK: 140	Glass in the construction industry - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description International documents referenced:EN 12150-1:2015+A1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
72/0029/19 TNK: 120	Thermal insulation products for buildings - Products made of loose Loose-fill cellulose in situ (LFCI) - Part 1: Specifications for products before installation International documents referenced:EN 15101-1:2013+A1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
72/0030/19 TNK: -	Toilet bowls and sets - Connecting dimensions International document adopted: EN 33:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
72/0031/19 TNK: -	Ceramic cladding elements - Part 4: Determination of strength in bending and fracture load International documents referenced:EN ISO 10545-4:2019 + ISO 10545-4:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
73/0080/19 TNK: 36	Design of concrete bridge structures (amendment to CSN 73 6214:2014)	19-08 19-09	Czech Technical University in Prague Faculty of Civil Engineering Thákurova 2077/7 Prague 6 166 29
73/0081/19 TNK: 35	National Annex - Eurocode 3: Design of steel structures - Part 4-2: Tanks	19-06 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
73/0082/19 TNK: 141	Railway applications - Noise emission - Roughness measurement rail surface in relation to rolling noise International document adopted: EN 15610:2019 (RAIL) **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
73/0083/19 TNK: 41	Implementation of special geotechnical works - Trysková grouting International Document Adopted: EN 12716:2018	19-11 20-02	Ing. Jindřich Řičica Štichova 646/36 Prague 11 149 00
73/0084/19 TNK: 76	Daylighting in buildings - Part 2: Daylighting in dwellings buildings (amendment to CSN 73 0580-2:2007)	19-09 19-10	Atelier of lighting technology s.r.o. Braškovská 368/1 Prague 6 - Liboc 161 00
73/0085/19 TNK: 8	Acoustics - Noise protection in buildings and assessment Acoustic properties of construction products - Requirements (revision of ČSN 73 0532:2010)	20-02 20-07	Centrum stavebního inženýrství a.s. Pražská 16 Prague 10 - Hostivař 102 21
75/0026/19 TNK: 104	Water quality - Guidance for sampling mesozooplankton from marine and brackish waters using a network International document adopted: EN 17218:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
75/0027/19 TNK: 145	Backfilled dams (revision of ČSN 75 2310:2006)	19-07 19-12	Sweco Hydroprojekt a.s. Táborská 940/31 Prague 4 140 16
80/0017/19 TNK: 31	Textiles - Quantitative chemical analysis - Part 18: Mixtures silk with other protein fibres (sulphuric acid method) International documents referenced:EN ISO 1833-18:2019 + ISO 1833-18:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
80/0018/19 TNK: 31	Textiles - Quantitative chemical analysis - Part 21: Mixtures chlorofibres, certain modacrylic fibres, certain elastane fibres, acetate, triacetate and certain other fibres (method using cyclohexanone) International documents referenced:EN ISO 1833-21:2019 + ISO 1833-21:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
80/0019/19 TNK: 31	Textiles - Quantitative chemical analysis - Part 10: Mixtures triacetate or polylactide fibres and certain other fibres (method with using dichloromethane) International documents referenced:EN ISO 1833-10:2019 + ISO 1833-10:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
80/0020/19 TNK: 31	Textiles - Determination of metal content - Part 3: Determination of lead released by the artificial saliva solution International document adopted: EN 16711-3:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
80/0021/19 TNK: 31	Textiles - Quantitative chemical analysis - Part 3: Mixtures acetate and certain other fibres (acetone method) International documents referenced:EN ISO 1833-3:2019 + ISO 1833-3:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
83/0046/19 TNK: 117	Air quality - Sampling and analysis of pollen grains and allergenic mould spores in the air - The volumetric method according to Hirst International document adopted: EN 16868:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
84/0003/19 TNK: -	Fume cupboards - Part 3: Type test methods International document adopted: EN 14175-3:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
85/0031/19 TNK: 81	Dentistry - Dental mirrors International documents referenced:EN ISO 9873:2019 + ISO 9873:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
87/0041/19 TNK: 96	Intelligent Transport Systems (ITS) - Vehicular communications - Geographic network design - Part 5: Transmission protocols - Subpart 1: Basic transmission protocol International document adopted: ETSI EN 302 636-5-1 V2.2.1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
91/0011/19 TNK: 31	Loose laid tiles - Semi-rigid multilayer modular floor tiles (MMF) with a wear-resistant surface layer International documents referenced:EN 16511:2014+A1:2019	19-07 19-09	Textile Testing Institute, s.p. Václavská 6 Brno 658 41
91/0012/19 TNK: 31	Resilient and laminate floor coverings - Determining the impact simulated movement of the furniture leg International document adopted: prEN ISO 16581 + ISO 16581:2014	19-08 19-10	Textile Testing Institute, s.p. Václavská 6 Brno 658 41
91/0013/19 TNK: 31	Resilient floor coverings - Specifications for solid and patterned linoleum with cork backing International document adopted: prEN 687	19-08 19-10	Textile Testing Institute, s.p. Václavská 6 Brno 658 41
91/0014/19 TNK: 31	Resilient floor coverings - Specifications for solid and patterned linoleum with foam backing International document adopted: prEN 686	19-08 19-10	Textile Testing Institute, s.p. Václavská 6 Brno 658 41
94/0018/19 TNK: -	Skateparks - Safety requirements and test methods International Document Adopted: EN 14974:2019	19-08 19-10	Institute for Testing and Certification, a.s. tr. Tomas Bata 299 Zlín - Louky 763 02
94/0019/19 TNK: -	Inflatable play equipment - Part 1: Safety requirements and test methods International document adopted: EN 14960-1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
94/0020/19 TNK: -	Stationary training equipment - Part 9: Elliptical training equipment, other specific safety requirements and testing methods International documents referenced:EN ISO 20957-9:2016/A1:2019 + ISO 20957-9/Amd.1:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
97/0004/19 TNK: 42	Information technology - Fish and seafood products products - Requirements for the marking of unit packs and pallets in trade in fish and seafood products International document adopted: prEN 17099 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
97/0005/19 TNK: 42	Date and time - Information exchange display - Part 1: Basic rules International Document Adopted: ISO 8601-1:2019	19-07 19-09	HEDO Praha s.r.o. Sušilova 1506/15 Prague 10 - Uhříněves 104 00
97/0006/19 TNK: 42	Date and time - Information exchange display - Part 2: Extensions International Document Adopted: ISO 8601-2:2019	19-08 19-10	HEDO Praha s.r.o. Sušilova 1506/15 Prague 10 - Uhříněves 104 00
98/0003/19 TNK: 20	Health Informatics - Syntax for displaying content Healthcare classification systems - Markup language for classification (ClaML) International document adopted:FprEN ISO 13120 + ISO 13120:2019 **)	19-08 19-09	Czech Agency for Standardization, State Contributory organizations Biskupský dvůr 1148/5 Prague 1 110 00
MP/0001/19 TNK: 65	Concrete tiles and fittings for roofing and cladding Walls - Product Specification International documents referenced:EN 490:2011+A1:2017 (CPR)	19-07 19-09	Research Institute of Civil Engineering - Certification Company, s.r.o. Pražská 810/16 Prague 15 - Hostivař 102 00
MP/0002/19 TNK: -	Fibre cement boards and fittings - Product specification and test methods International documents referenced:EN 492:2012+A2:2018 (CPR)	19-08 19-10	Research Institute of Civil Engineering - Certification Company, s.r.o. Pražská 810/16 Prague 15 - Hostivař 102 00
MP/0003/19 TNK: -	Waterproofing strips and foils - Plastic and rubber foils for Moisture insulation and plastic and rubber strips and foils for pressure insulation Water - Definitions and characteristics International documents referenced:EN 13967:2012+A1:2017 (CPR)	19-07 19-09	Research Institute of Civil Engineering - Certification Company, s.r.o. Pražská 810/16 Prague 15 - Hostivař 102 00
MP/0004/19 TNK: -	Fibre cement flat boards - Product specification and test methods International documents referenced:EN 12467:2012+A2:2018 (CPR)	19-08 19-10	Research Institute of Civil Engineering - Certification Company, s.r.o. Pražská 810/16 Prague 15 - Hostivař 102 00
MP/0005/19 TNK: 132	Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance International documents referenced:EN 13565-2:2018+AC:2019	19-10 20-02	PAVUS, a.s. Prosecká 412/74 Prague 9 190 00
MP/0006/19 TNK: 94	Medical Technical Valves - Low Pressure Thermostatic Mixers - General technical requirements International Document Adopted: EN 1287:2017	19-07 19-09	Sweco Hydroprojekt a.s. Táborská 940/31 Prague 4 140 16
MP/0007/19 TNK: -	Toilet bowls and sets with built-in odour Deadline International Document Adopted: EN 997:2018 (CPR)	19-07 19-10	Institute for Testing and Certification, a.s. tr. Tomas Bata 299 Zlín - Louky 763 02
MP/0008/19 TNK: -	Cistern flushers for toilet bowls and urinals International Document Adopted: EN 14055:2018 (CPR)	19-07 19-10	Institute for Testing and Certification, a.s. tr. Tomas Bata 299 Zlín - Louky 763 02

Czech Agency for
standardization

Director of the Department
Standardization

Zdeňka Slaná v. r.

NOTICE NO.
74/19

Office for Technical Standardization, Metrology and State Testing

on proposals
to abolish the CSN

Office for
Technical Standardization, Metrology and State Testing submits according to § 6
Act No. 22/1997 Coll. for consideration of the list of Czech technical standards (ČSN)
proposed for cancellation due to their technical obsolescence, outdatedness or
for other reasons.

Anyone who has
reasoned objections to the cancellation of the CSN may be lodged within 6 weeks of publication
this notification to the standards officer listed in the list of standards proposed for
cancellation, at the following address

Czech Agency for
Standardization,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1

E-mail:
normalizace@agentura-cas.cz

Tel: 221
802 111

CSN designation

Month and year of publication

(date of approval)

Sorting character

CSN name

Department number

Name of the referee TIME

CSN 44 1309

July 2006

44 1309

Solid fuels - Withdrawal,
sample preparation and mechanical testing of briquettes

2500

Ing. Hejtmánková

CSN 70 3000

1991-02-08

70 3000

Principles for use
glass containers

2500

Ing. Foretová

CSN 70 3002

November 1993

70 3002

Threaded glass mouths
screw cap packaging. Dimensions

2500

Ing. Foretová

CSN 70 3401

1986-12-08

70 3401

Glass for cosmetic
industry. Packaging glass for cosmetics

2500

Ing. Foretová

CSN 70 3500

1987-02-02

70 3500

Large packing glass.
Common provisions

2500

Ing. Foretová

Czech Agency for
standardization

Director of the Standardisation Department

Zdeňka Slaná v. r.

NOTICE No 75/19

of the Office for
technical standardisation, metrology and state testing

on the public hearing on the proposals
European standards CEN

Office of Technical
Standardisation, Metrology and State Testing
submits pursuant to Section 6 of Act No. 22/1997
Coll. for public consultation the following draft standards of the European Committee for
standardisation (CEN).

On these proposals
considered as draft CSNs can be submitted by anyone, no later than 2 weeks before the relevant
by the deadline indicated below for each item, to submit comments to

Czech Agency for
Standardization,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1

E-mail: normalizace@agentura-cas.cz

Tel: 221 802 111

These proposals are
available from the Customer Centre of the Czech Standards Agency,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1.

Most of these proposals can be read and
comment at http://drafts.unmz.cz/

EUROPEAN PROPOSALS
STANDARDS SUBMITTED FOR PUBLIC CONSULTATION

CEN

Decree
period from 2019-06-01 to 2019-06-30

The data are
taken from Database
PRICE.

Mark	Name in English	Originator	Deadlines
prEN ISO 27509	Petroleum and natural gas industries - Compact flanged connections with IX seal ring (ISO/DIS 27509:2019)	CEN/TC 12	2019-09-06
EN 12604:2017/prA1	Industrial, commercial and garage doors and gates - Mechanical aspects - Requirements and test methods	CEN/TC 33	2019-08-29
EN 12453:2017/prA1	Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Requirements and test methods	CEN/TC 33	2019-09-05
prEN ISO 28399	Dentistry - Products for external tooth bleaching (ISO/DIS 28399:2019)	CEN/TC 55	2019-09-06
prEN ISO 7787-2	Dentistry - Laboratory cutters - Part 2: Carbide laboratory cutters (ISO/DIS 7787-2:2019)	CEN/TC 55	2019-09-06
prEN ISO 15883-5	Washer disinfectors - Part 5: Performance requirements and test method criteria for demonstrating cleaning efficacy (ISO/DIS 15883-5:2019)	CEN/TC 102	2019-09-02
prEN 1254-3	Copper and copper alloys - Plumbing fittings - Part 3: Compression fittings for use with plastics and multilayer pipes	CEN/TC 133	2019-09-05
prEN 1254-2	Copper and copper alloys - Plumbing fittings - Part 2: Compression fittings for use with copper tubes	CEN/TC 133	2019-09-05
prEN 1254-1	Copper and copper alloys - Plumbing fittings - Part 1: Capillary fittings for soldering or brazing to copper tubes	CEN/TC 133	2019-09-05
prEN 1254-6	Copper and copper alloys - Plumbing fittings - Part 6: Push-fit fittings for use with metallic tubes, plastics and multilayer pipes	CEN/TC 133	2019-09-05
prEN 1254-8	Copper and copper alloys - Plumbing fittings - Part 8: Press fittings for use with plastics and multilayer pipes	CEN/TC 133	2019-09-05
prEN 1254-7	Copper and copper alloys - Plumbing fittings - Part 7: Press fittings for use with metallic tubes	CEN/TC 133	2019-09-05
prEN 1254-4	Copper and copper alloys - Plumbing fittings - Part 4: Threaded fittings	CEN/TC 133	2019-09-05
prEN 1254-5	Copper and copper alloys - Plumbing fittings - Part 5: Capillary fittings with short ends for brazing to copper tubes	CEN/TC 133	2019-09-05
prEN 1254-20	Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information	CEN/TC 133	2019-09-05
prEN 1816	Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing	CEN/TC 134	2019-09-19
prEN 1817	Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings	CEN/TC 134	2019-09-19
prEN 12199	Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings	CEN/TC 134	2019-09-19
prEN 17396	Resilient floor coverings - Quartz vinyl tiles - Specification	CEN/TC 134	2019-08-29
prEN 13523-18	Coil coated metals - Test methods - Part 18: Resistance to staining	CEN/TC 139	2019-09-19
prEN 13523-6	Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)	CEN/TC 139	2019-09-19
prEN 13523-20	Coil coated metals - Test methods - Part 20: Foam adhesion	CEN/TC 139	2019-09-19
prEN 13001-2	Crane safety - General design - Part 2: Load actions	CEN/TC 147	2019-08-29
prEN ISO 11298-4	Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO/DIS 11298-4:2019)	CEN/TC 155	2019-09-04
prEN ISO 23856	Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO/DIS 23856:2019)	CEN/TC 155	2019-09-05
prEN ISO 15004-1	Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO/DIS 15004-1:2019)	CEN/TC 170	2019-08-30
prEN ISO 8624	Ophthalmic optics - Spectacle Frames - Measuring system and terminology (ISO/DIS 8624:2019)	CEN/TC 170	2019-08-29
prEN ISO 8062-3	Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019)	CEN/TC 190	2019-09-10
prEN 14972-3	Fixed firefighting systems - Water mist systems - Part 3: Test protocol for office, school and hotel for automatic nozzle systems	CEN/TC 191	2019-08-29
prEN 15004-5	Fixed firefighting systems - Gas extinguishing systems - Part 5: Physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant (ISO 15420-9:2016, modified)	CEN/TC 191	2019-09-19
prEN 15004-4	Fixed firefighting systems - Gas extinguishing systems - Part 4: Physical properties and system design of gas extinguishing systems for HFC 125 extinguishant (ISO 14520-8:2016, modified)	CEN/TC 191	2019-09-19
prEN 15004-6	Fixed firefighting systems - Gas extinguishing systems - Part 6: Physical properties and system design of gas extinguishing systems for HFC 23 extinguishant (ISO 14520-10:2016, modified)	CEN/TC 191	2019-09-19
prEN 15004-2	Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2016, modified)	CEN/TC 191	2019-09-19
prEN 17407	Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Collecting heads and dividing breechings PN16	CEN/TC 192	2019-09-05
prEN 17408	Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry	CEN/TC 193	2019-09-12
prEN ISO 23062	Foundry machinery - Safety requirements for moulding and coremaking machinery and associated equipment (ISO/DIS 23062:2019)	CEN/TC 202	2019-08-29
EN ISO 11737-1:2018/prA1	Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of Microorganisms on products - Amendment 1 (ISO 11737-1:2018/DAM 1:2019)	CEN/TC 204	2019-08-30
prEN 17191	Children´s Furniture - Seating for children - Safety requirements and test methods	CEN/TC 207	2019-09-12
prEN ISO 389-7	Acoustics - Reference zero for the calibration of audiometric equipment - Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions (ISO/DIS 389-7:2019)	CEN/TC 211	2019-09-19
prEN ISO 23372	Respiratory therapy equipment: Air entrainment devices (ISO/DIS 23372:2019)	CEN/TC 215	2019-09-06
prEN ISO 5667-1	Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO/DIS 5667-1:2019)	CEN/TC 230	2019-09-19
prEN ISO 13164-1	Water quality - Radon-222 - Part 1: General principles (ISO 13164-1:2013)	CEN/TC 230	2019-09-05
prEN ISO 13164-3	Water quality - Radon-222 - Part 3: Test method using emanometry (ISO 13164-3:2013)	CEN/TC 230	2019-09-05
prEN ISO 13164-2	Water quality - Radon-222 - Part 2: Test method using gamma-ray spectrometry (ISO 13164-2:2013)	CEN/TC 230	2019-09-05
prEN ISO 13164-4	Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting (ISO 13164-4:2015)	CEN/TC 230	2019-09-05
prEN ISO 13165-2	Water quality - Radium-226 - Part 2: Test method using emanometry (ISO 13165-2:2014)	CEN/TC 230	2019-09-05
prEN ISO 13165-1	Water quality - Radium-226 - Part 1: Test method using liquid scintillation counting (ISO 13165-1:2013)	CEN/TC 230	2019-09-05
prEN ISO 13165-3	Water quality - Radium-226 - Part 3: Test method using coprecipitation and gamma-spectrometry (ISO 13165-3:2016)	CEN/TC 230	2019-09-05
prEN 17393	Thermal spraying - Tubular coating tensile test	CEN/TC 240	2019-09-05
prEN ISO 20418-3	Textiles - Qualitative and quantitative proteomic analysis of some animal hair fibers - Part 3: Peptide detection using LC-MS without protein reduction (ISO/DIS 20418-3:2019)	CEN/TC 248	2019-09-10
prEN 17410	Plastics - Controlled loop recycling of post-consumer (or post-use) PVC-U windows and doors	CEN/TC 249	2019-09-12
prEN ISO 844	Rigid cellular plastics - Determination of compression properties (ISO/DIS 844:2019)	CEN/TC 249	2019-09-17
prEN ISO 2440	Flexible and rigid cellular Polymeric materials - Accelerated ageing tests (ISO/FDIS 2440:2019)	CEN/TC 249	2019-09-04
prEN 13231-2	Railway applications - Track - Acceptance of works - Part 2: Acceptance of reprofiling rails in plain line, switches, crossings and expansion devices	CEN/TC 256	2019-09-19
prEN 17397-1	Railway applications - Rail defects - Part 1: Rail defect management	CEN/TC 256	2019-08-29
prEN ISO 11463	Corrosion of metals and alloys - Evaluation of pitting corrosion (ISO/DIS 11463:2019)	CEN/TC 262	2019-09-05
prEN 13725	Stationary source emissions - Determination of odour concentration by dynamic olfactometry and odour emission rate from stationary sources	CEN/TC 264	2019-09-12
prEN ISO 27587	Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries (ISO/DIS 27587:2019)	CEN/TC 289	2019-09-09
prEN ISO 17131	Leather - Identification of leather with microscopy (ISO/DIS 17131:2019)	CEN/TC 289	2019-09-06
prEN ISO 2692	Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO/DIS 2692:2019)	CEN/TC 290	2019-08-26
prEN ISO 20049-1	Solid biofuels - Determination of self-heating of pelletized biofuels - Part 1: Isothermal calorimetry (ISO/DIS 20049-1:2019)	CEN/TC 335	2019-09-06
EN 16516:2017/prA1	Construction products: Assessment of release of dangerous substances - Determination of emissions of into indoor air	CEN/TC 351	2019-08-29
prEN ISO 17200	Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/DIS 17200:2019)	CEN/TC 352	2019-09-06
prEN 16524	Mechanical products - Methodology for reduction of environmental impacts in product design and development	CEN/TC 406	2019-09-12
prEN 17412	Building Information Modelling - Level of Information Need - Concepts and principles	CEN/TC 442	2019-09-19
prEN 17399	Algae and algaebased products or intermediates - Terms and definitions	CEN/TC 454	2019-09-05
prEN ISO 128-1	Technical product documentation (TPD) - General principles of representation - Part 1: Introduction and fundamental requirements (ISO/DIS 128-1:2019)	CEN/SS F01	2019-08-27
prEN ISO 128-100	Technical product documentation - General principles of representation - Part 100: Index (ISO/DIS 128-100:2019)	CEN/SS F01	2019-09-12
prEN ISO 9093	Small craft - Seacocks and through-hull fittings (ISO/DIS 9093:2019)	CEN/SS T01	2019-09-06
prEN ISO 8848	Small craft - Remote steering systems (ISO/DIS 8848:2019)	CEN/SS T01	2019-09-20
prEN 10371	Metallic materials - Small punch test method	PRICE/TC 459/SC 1	2019-08-29
prEN 10369-1	Prestressing steels - Protected and sheathed strands for prestressing - Part 1: General requirements	PRICE/TC 459/SC 4	2019-08-29
prEN 10369-2	Prestressing steels - Protected and sheathed strands for prestressing - Part 2: Sliding strands	PRICE/TC 459/SC 4	2019-08-29
prEN 10370	Steel for the reinforcement of concrete - Stainless steel	PRICE/TC 459/SC 4	2019-08-29
prEN 10369-3	Prestressing steels - Protected and sheathed strands for prestressing - Part 3: Adherent strands	PRICE/TC 459/SC 4	2019-08-29
prEN ISO/IEC 27000	Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2018)	CEN/CLC/JTC 13	2019-09-19

Czech Agency for
standardization

Director of the Standardisation Department

Zdeňka Slaná v. r.

NOTICE No 76/19

of the Office for
technical standardisation, metrology and state testing

on the public hearing on the proposals
European standards CENELEC

On these proposals
considered as draft CSNs can be submitted by anyone, no later than 2 weeks before the relevant
by the deadline indicated below for each item, to submit comments to

Czech Agency for
Standardization,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1

E-mail: normalizace@agentura-cas.cz

Tel: 221 802 111

These proposals are
available from the Customer Centre of the Czech Standards Agency,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1.

Most of these proposals can be read and
comment at http://drafts.unmz.cz/

DRAFT EUROPEAN STANDARDS SUBMITTED FOR PUBLIC
THE SESSION

CENELEC

Decree
period from 2019-06-01 to 2019-06-30

The data are
taken from Database
CENELEC.

Mark	Name in English	Originator	Deadlines
prEN 62485-6:2019	Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of lithium-ion batteries in traction applications	CLC/TC 21X	2019-09-06
prEN 62485-5:2019	Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium-ion batteries	CLC/TC 21X	2019-09-06
EN 55014-1:2017/prA1 (fragment 1):2019	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission	CLC/TC 210	2019-09-20
prEN IEC 62149-11:2019	Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface	CLC/SR 86C	2019-09-13
EN 55014-1:2017/prA1 {fragment 4}:2019	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission	CLC/TC 210	2019-09-20
EN 60598-1:2015/prA2:2019	Luminaires - Part 1: General requirements and tests	CLC/TC 34	2019-08-30
prEN IEC 63045:2019	Ultrasonics - Non-focusing and weakly focusing pressure pulse sources - Characteristics of fields	CLC/SR 87	2019-09-20
prEN IEC 61189-5-504:2019	Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-504: General test methods for materials and assemblies - Pocess ionic contamination testing (PICT)	CLC/SR 91	2019-09-20
prEN IEC 63115-2:2019	Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride rechargeable cells and modules for use in industrial applications - Part 2: Safety	CLC/TC 21X	2019-09-20
EN 55014-2:2015/prA1 {fragment 3}:2019	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard	CLC/TC 210	2019-09-20
prEN IEC 62610-6:2019	Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in according with IEC 60297 and IEC 60917 Series - Part 6: Air recirculation and bypass of indoor cabinets	CLC/SR 48D	2019-09-06
prEN 61788-26:2019	Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors	CLC/SR 90	2019-09-06
prEN IEC 60335-2-40	Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers	CLC/TC 61	2019-09-13
EN IEC 61000-3-2:2019/prA1:2019 {fragment 1}	Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)	CLC/TC 210	2019-09-06
EN 50083-2:2012/prA2	Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment	CLC/TC 209	2019-09-06
prEN IEC 62973-2:2019	Railway applications - Batteries for auxiliary power supply systems - Part 2: Nickel Cadmium (NiCd) batteries	CLC/TC 9X	2019-08-30
prEN IEC 61472-2:2019	Live working - Minimum approach distances - Part 2: A method of determination for AC system 1,0 to 72,5 kV	CLC/TC 78	2019-09-20
prEN 63180:2019	Methodology for determining the functionality of detectors - Part 1: Passive infra-red detectors for presence and motion detection	CLC/TC 23BX	2019-09-06
prEN IEC 60317-0-6:2019	Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire	CLC/TC 55	2019-09-06
EN 50401:2017/prA1	Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits (110 MHz - 100 GHz), when put into service	CLC/TC 106X	2019-08-30
prEN 63181-2:2019	LCD multi-screen display terminals - Part 2: Measuring methods	CLC/TC 100X	2019-09-06
prEN 61753-061-2:2019	Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlled environments	CLC/TC 86BXA	2019-09-06
prEN 61977:2019	Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification	CLC/TC 86BXA	2019-09-06
prEN IEC 62148-6:2019	Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers	CLC/SR 86C	2019-08-30
prEN 50377-14-1	Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 14-1: Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793-2-50 single-mode B1 or B6 fibre for Category C according to EN 61753 1	CLC/TC 86BXA	2019-08-30
FprEN IEC 60215:201X/prAA	Safety requirements for radio transmitting equipment - General requirements and terminology	CLC/SR 103	2019-09-06
prEN IEC 62401	Radiation protection instrumentation - Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material	CLC/TC 45B	2019-08-30
prEN IEC 62327	Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation	CLC/TC 45B	2019-08-30
EN 50131-1:2006/prA3:2019	Alarm systems - Intrusion and hold-up systems - Part 1: System requirements	CLC/TC 79	2019-08-30
EN IEC 61300-2-4:2019/prA1:2019	Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retentio	CLC/TC 86BXA	2019-09-13
FprEN 60335-2-36:2017/prA11:2019	Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements	CLC/TC 61	2019-09-20
prEN IEC 61225	Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems	CLC/TC 45AX	2019-08-30
prEN IEC 62841-4-4:2019	Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws	CLC/TC 116	2019-08-30
prEN IEC 62841-4-4:2019/prAA:2019	Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws	CLC/TC 116	2019-08-30
EN 55014-1:2017/prA1 {fragment 5}:2019	Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission	CLC/TC 210	2019-09-20
prEN IEC 63247-1:2019	Live working - Part 1: Footwear for electrical protection - Insulating footwear and overboots	CLC/TC 78	2019-09-20

Czech Agency for
standardization

Director of the Standardisation Department

Zdeňka Slaná v. r.

NOTICE No 77/19

Office for Technical Standardization,
metrology and state testing

on public
discussion of draft European telecommunications standards

Office of Technical
Standardisation, Metrology and State Testing
submits pursuant to Section 6 of Act No. 22/1997
Coll. for public consultation the following draft ETSI standards -
European Telecommunications Standards Institute.

On these proposals
considered to be draft CSNs, anyone may submit comments in the timeframe set out below
deadline at

Czech Agency for
Standardization,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1

E-mail: normalizace@agentura-cas.cz

Tel: 221 802 111

These proposals are
available from the Customer Centre of the Czech Standards Agency,

state contributory
organization,

Bishop's Court
1148/5, 110 00 Prague 1.

Most of these proposals can be read and
comment at http://drafts.unmz.cz/

DRAFT EUROPEAN STANDARDS SUBMITTED FOR PUBLIC CONSULTATION

ETSI

in the period from 2019-06-01 to 2019-06-30

Edition: AP
20190917

Deadline
Comments: 2019-09-17

Document marking

ETSI Schedule item designation

Working Group (WG)

ETSI EN 301 549 V3.1.1

REN/HF-00301549v311

Accessibility requirements for ICT products and services

Czech Agency for
standardization

Director of the Standardisation Department

Zdeňka Slaná v. r.